Home >> Manufacturers >> JOEMARS MACHINERY&ELECTRIC IND.CO.,LTD.
·
JOEMARS MACHINERY&ELECTRIC IND.CO.,LTD.
Products Name:
JMNC60+HD50+D60EDM
Products Infomation:
HD50/HD75/HD100 CNC POWER SUPPLY UNIT FEATURES:
1. Adopt Heidenhain TNC416 CNC EDM CONTROLLER.
2. Most advanced "L.W.F" circuits to decrease the electrode wear, especially at the sharp corners.
3. Special "TRACKING MODE" off time control circuits to prevent arcing.
4. X,Y,Z 3 axes moves simultaneously to machining high precise, sophisticated molds.
5. Dialogue programming and easy to operae.
6. Using "MOSFET" sparking circuit to enhance performance and get the big areas of mirror finish easily.
7. The whole CNC power supply unit is designed with module boxes to keep simple maintenance & service.
8. Dual voltage (high / low voltage) currents being synchronously discharged allows faster metal removal rate and uniform surface finish.
9. Memory for total 100 programs and maximum 10000 blocks.
10. RS-232-C interface for file transfer.
11. MM/INCH selection.
12. 10.4" TFT color LCD display and soft key operation.
13. Program input resolution : 0.001mm.
14. Operating modes(1)Manual(2)Jog positioning(3)Positioning with MDI(4)Program run, single block(5)Program run, full sequence(6)Programming and editin(7)Test run
15. Parameter programming available, including Mathematical function, variable parameter comparison and indexed data assignment.
16. Programmable functions:
(1)Norminal position (absolute or incremental) in Cartesian or polar coordinates
(2)Linear path in 3 out 4 axes
(3)Circular path in 2 out of 4 axes
(4)Helical path with simultaneous C-axis motion (C-axis is optional)
(5)Tangential contour approach and departure
(6)Tool number and length, radius compensation, tool undersize
(7)Spindle speed for C-axis (With C-axis only)
(8)Rapid traverse
(9)Feed rate
(10)Insertion of programs into other programs
(11)Subprograms and program section repeats
(12)Fixed cycle: disk pocket, EDM polishing, tool definition, generator definition
(13)Datum shift, coordinate system rotation, mirror image, scaling
(14)Dwell time, miscellaneous functions M, program stop
HIGH QUALITY:Productivity begins with the highest quality machine tools.
JOEMARS high performane CNC EDM are designed & manufactured for versatility, high reliability and long service life
COMPUTER AIDED DESIGN FOR THE HIGHEST RIGIDITY CONSTRUCTION:
JMNC 32 A & JMNC 43 A series-sturdy C-frame design, fine-grained cast iron.
JMNC 60 series-designed with a fixed worktable and spindle moves in X, Y & Z direction.
High resolution DC SERVO system on 3 axes for fast accurate position & control.
Precision ground ballscrews & ballways for 3 axes for easy & accurate positioning.
EFFICIENT FLUSHING & FILTRATION:A most excellant flushing & filtration system are designed to ensure optimal erosion condition.
Low maintenance & easy replacement for the paper filter cartidge.
Effcient heat changer system to maintain thermal stability even at high current machining.
THE MAIN FEATURES OF THE CNC POWER SUPPLY:
Most Advanced "L.W.F." circuits to decrease the electrode wear, especially at the sharp corners.
Special " TRACKING MODE" Off time control circuits to prevent arcing.
X Y Z 3 axes moves simultaneously to machining high precise, sophisiticated moulds.
Dialogue programming and easy to operate.
Using "MOSFET" sparking circuits to enhance performance and get the big areas of mirror finish easily.
All machining parameters can be modified at any time during sparking and without affecting the stored memory.
Complete and powerful CNC functions:Z axis vertical machining, multi holes machining, side machining, orbiting machining, 3 axes contour machining, auto edge finding, auto circle center finding.
Auto electrode changers, C axis are available to enhance the fully automated machining, non-stop, top-performance production.
