Home >> Manufacturers >> JOEMARS MACHINERY&ELECTRIC IND.CO.,LTD.
·
JOEMARS MACHINERY&ELECTRIC IND.CO.,LTD.
Products Name:
JM528DZSuper Drill EDM
Products Infomation:
FEATURE: 100 Sets machining condition memories : Can store 100 sets user machining condition.
"Fuzzy" control circuits : Only input (A) Machining materials, (B) Electrode diameter, (C) Electrode wear. New starter learns how to operate on in 5 minutes.
Electrode will automatically retract to home point when arriving depth, greatly reduce moving time.
Z axies coordinate will automatically set to zero when finding edge.
" Off time " will be adjusted when machining is not stable, if unstable situation over a certain time, sparking will be stopped.
Special high pressure pump design, water come out quickly and with pressure releasing control system in order to reverse water without any dropping.
Machining parameters can be modified temporarily while machining, without affecting the stored parameter.
THE FEATURE OF DZ：
1. 100 sets machining condition memouries : Can store 100 sets user machining condition.
2. 6 kinds machining parameters : includes peak curent, capacitor, on time, off time, spearking gap, and Servo sensitivy.
3. Fuction of choosing " Fuzzy" machining condition : through (a) Machining materials, (b)Electrode diameter, (c) Electrode wear, to chose the best machining conditions.
4. Includes 3 axes DRO system : X, Y axes use linear scale, Z axis uses encoder.
5. Five kinds of alarm indicators : will be lighten when depth arrival, arcing, low dielectric level, for safety, and a short on electrode and workpiece.
6. Anti-hitting system for electrode.
7. Electrode will automatically retract when retract when arriving depth : Thriogh DRO counter to set home point, electrode will automatically retract to home point, electrode wear, and machining depth. The bottom of electrode will automatically retract to home point when arriving depth.
8. Using " MOSFET" sparking circuits, suitable for slanting, carbide, hard alloys, hard steel, and powder metallurgical.
9. Electrode renge from 0.2 to 3.0 m/m, apply to slanting, spherical, and curved wokpieces machining.
10. Arcing protecting circuits:automatically adjust "off time" when maching is not stable. If arcing over certain time,sparking will be automatically stopped.
11. Special high pressure pump design, water come out quickly and with pressure releasing control system in order to reverse water without any dropping.
12. Machining paramters can be modified timporarily while sparking, without affecting the stored parameters.
