Home >> Manufacturers >> TAI-1 ELECTRON MACHINING CO.,LTD.
·
TAI-1 ELECTRON MACHINING CO.,LTD.
Products Name:
DE-430ZNC EDM
Products Infomation:
FEATURES:Seven depth setting which can be edited & refined at any time while machining.
Six material selection. Cu<->St , Cu<->Wc , Cu<->Cu , Gr<->St , Al<->ST and St<->St.
Ten programmable banks of EDM machining parameters. Each bank includes pulse control , jumping sequence control , current control, currect selection , material selection, high voltage override and mirror finishing.
Yo can choose preferred methods of pulse control.
-Select material of electrode & workpiece and use automatic timing function.
-Direct time setting in micro-seconds. Of course, it will be better to combaine both methods.
Inch / mm display and setting.
Maximum-value display function to obtain a stable read-out of machining axis position. Target position , residual position and current position can be displayed simultaneously.
Multi-point linear error compensation for three Axis. Each axis has REF function.
Guided servo and stability control system with LED display.
Set-up function for mechanical origin point. Two coordinate system and central point finding functions.
Plug-in modular PC board design..
PROTECTION AND SECURITY
Memory back-up for Axis positions & all machining parameters in case of power loss or failure.
Security key for locking machining parameters to prevent unauthorized changes.
Simplified ARC prevention circuit and security function.
Jumping of Z-axis while machining can be set buffer distance.
Dielectric level sensor, thermometer and flame detection sensor.
Electrode crash protection.
Automatic power-off while machining depth achieves.
