Home >> Manufacturers >> TAI-1 ELECTRON MACHINING CO.,LTD.
·
TAI-1 ELECTRON MACHINING CO.,LTD.
Products Name:
DE-860
Products Infomation:
FEATURES:Seven depth setting which can be edited & refined at any time while machining.
Six material selection. Cu<-->St , Cu<-->WE , Cu<-->Cu , Gr<-->St , Al<-->St and St<--St.
Ten programmable banks of DEM machining parameters, Each bank includes pulse control , jumping sequence control , current control , current selection , material selection , high voltage override and mirror finishing.
You can choose preferred mothod of pulse control , Select material of electrode & workpiece and use automatic timing function. Direct time setting in micro-seconds. Of course , it will be better to combine both methods.
Inch/mm display and setting.
Maximum-value display function to obtain a stable read-out of machining axis position. Target position, Residual position and current position can be displayed simultaneously. Multi-point linear error compensation for three Axis. Each axis has REF function.
Guided servo and stability control system with LED display.
Set-up Function for mechanical origin point. Two coordinate system and central point finding function.
Plug-in modular PC board design.
PROTECTION AND SECURITY
Memory back-up for Axis posituons and all machining parameters in case of power loss or failure.
Security key for locking machining parmeters to prevent unauthorized changes.
Simplified ARC prevention circuit and security function.
Jumping of Z-axis while machining can be set buffer distance.
Dielectric level sensor, thermometer and flame detection sensor.
Electrode crash protection.
Automatic power-off while machinnng depth achieves.
STANDARD EQUIPMENT
Mirror finisher
Polarity change selection
End-point maching function
Electronic dial gauge
3 Axes linear scales and digital readout display
